how To Charge A Phone With A Broken Charger Port

It’s awful to have an unrepaired charger port! It’s not something that can be fixed unless it’s serviced. Fortunately, the ports for charging are easily repaired and aren’t expensive in comparison to a damaged LCD.

However, if you’re with no utilities and you’re forced to open your phone to find something crucial and I’m able to show users how you can charge their phones using AAA batteries. Double-A batteries for charging your battery in the event of an inoperable charging port using batteries that are connected together and I’ll inform you more about below.

Before doing anything else, check if the issue is in fact an issue with the port that charges. There are numerous possibilities for why your device isn’t charged, but if you’re certain, read this article.

Need to fix a problem with a charging port

1. Cleanse the Battery

If you suspect that there’s dust in the phone’s battery and this is the reason the phone isn’t charging then you should clean it up gently. Clean both the positive and negative terminals that connect to the battery. Also, clean the connectors well. Clean them with the aid of toothpicks.

2. It is possible to charge the battery separately

It is recommended to charge your battery using the charger for your battery. This is only for phones with batteries that are removable. After about two to three hours you can connect your phone’s battery to check whether the battery of the phone is fully charged.

3. Change the adapter

Before you carry out any further experiments Make sure to switch the adapter of your charger. It is possible that the adapter has some issues.

4. Make the change to the cable

Change the cable. There could be damage internal to the wires and your phone isn’t charging. Examine other components prior to contacting the charger port of your phone. malfunctioning.

5. Charge the different phone

If you have the same charger you can try charging an alternative phone. If the phone you are charging is not charging, then the problem is the phone. One option is to contact the franchise or the manufacturer to fix the issue by them. Also, switch the number.

6. DIY USB port fix

This is probably the simplest to use, the fastest, and the most frequent solution to a malfunctioning charging port.

There are times when the face of the port for charging as well as the USB charger are not in good contact. The majority of the time this is due to defects in the design or manufacturing process or due to the continual unplugging and plugging of the charging cable.

Prior to anything else, clean the charging port. Utilize a flashlight as well as a toothpick/pin to take care to remove any dust that’s accumulated in the pin that charges.

  1. Turn off your device.
  2. If you can, take out the battery if you can.
  3. Use a small stick to move tabs that aren’t in the USB port on your phone.
  4. If the pin that charges your device is not aligned properly, pull it up slowly and slowly.
  5. Re-insert the battery.
  6. Connect the charger.

7. You can charge a battery using the help of a battery

This is only applicable to phones with batteries that are removable. In other cases, use method 1.

  1. Take the battery off of the device. Access the connector locations of the battery.

  2. Choose a 9-volt or an AAA/AA battery.

  3. Check for the negative and positive connectors on the batteries. The positive side is located in the red rectangle while the negative connector is located at the opposite side of the battery.

  4. Make sure both batteries and the device’s battery are of identical voltage. Most phones’ battery has 3.7V DC while one AAA or AA battery is 1.5V. Therefore, you’ll require 3 AAA batteries.

  5. Two metal wires should be covered by plastic insulation.

  6. Attach the batteries by tape.

  7. Secure the wires that are insulated to the batteries to supply the charge as well as to the battery.

  8. After a few minutes before the battery will have some energy. Remember that it’s not going to charge the battery of your phone as much, but it’s sufficient to be used in an emergency.

8. Rub the battery

Take out the battery of your phone.

Keep it in your palms. Make sure you generate sufficient heat and friction by pressing the battery in the palms of your hands. Place the battery back in the phone, and then try charging the battery again.

If these methods don’t resolve the issue there’s a reason it’s not caused by a malfunctioning charging port. Take a look at the battery in your phone, because it’s among the most common reasons the reason your phone won’t charge.

How can you charge the phone with no charger?

If you are having issues related to your charger, and you’ve found the cause, it’s a USB port. The majority of you have secured your home, and there are delays in online deliveries, and individuals are not inclined to leave their homes for security reasons.

Here’s how to charge a smartphone without a charger

Items You Need

  • You’ll need the charging cable for your phone
  • Small scissors or cutters
  • Electrical Tape
  • Laptop
  • You must be aware of how to get rid of the battery
  • More concentration

Take the cable off of the charger

The charging cable should be cut vertically and you’ll be able to see the wires. You can identify the positive wire as well as the negative wire. All you need to do is remove the rubber sheets of wires and conduct the next test. Place the cable with one hand and adjust the charging connector on its USB side to make sure that the connection is established.

Peel Off the Wires

When you’ve cut your cable create the inner wires from the rubber black wire the next step is to remove these wires. This exposes the copper wire. The color red wire is positive while the black-colored wiring is negative. You can remove wire using nails (if you have nails that are sharp). Also, it could be done using the help of a cutter, but you need to be cautious when doing this.

The charging cables are all set. They are however too thin for them to be able to reach the charger port. We need to create them more robust to ensure they can fix the charger port that is damaged. Twist the copper strands in order to repair the damaged phone charger port. Make the end of the wire into a small ball, so that it will fix an Android charger port damaged issue quickly.

It is crucial to ensure that the size of the ball is identical to one another and these balls ought to be easily fixed to battery connectors. You can alter the size in accordance with your phone’s battery size.

After knots have been tidied The port on your Android that was damaged will be converted to a manual charger. Then connect the positive wire onto the positive terminal and the negative wire onto the negative terminal of the phone’s battery.

If you’re mobile charging port is damaged and not fixed, try clamping the knots with their corresponding terminals to see if it’s functioning.

Every battery has it’s positive along with its negative and positive terminals.

Additional Alternatives

The majority of smartphones come with a non-removable battery which means that there are alternatives to them also. Users don’t have to panic when faced with this issue and take their time.

Wireless Charger

Buy a wireless charger for your personal use and simplify life. Wireless chargers work by using the principle that electromagnetic induction. Certain wireless chargers have Bluetooth connectivity. It is possible to connect to the device using Bluetooth and charge quickly.

To recharge your phone completely it is necessary to recharge it with a wireless charger.


Now, if you’ve got an issue with your charging port, but don’t have the ability to get it fixed, and are in need of an urgent solution This is definitely worthwhile. Be careful not to get your phone damaged.

If you can, have your phone repaired rather than risking damage it due to playing with your charging ports for several hours. These are only temporary fixes as well as an explanation for why manufacturers began creating single unit phones: you could end up damaging your phone.

Leave a Reply

Your email address will not be published. Required fields are marked *