19.4 C
Munich

Westinghouse TV Won’t Turn On

Popular Posts

The problem with most Westinghouse TVs is the same: they won’t switch on.

This issue has been reported by many Westinghouse TV owners. Some say it’s been an ongoing issue for many years.

An easy fix for about 80% of Westinghouse TVs that won’t turn on is

Westinghouse TV won’t turn on

Resetting your Westinghouse TV can fix the problem. Wait 60 seconds before unplugging the TV. Wait 30 seconds after releasing the power button.

Unplug Westinghouse Television From Wall

This is an easy fix but it will turn your Westinghouse TV on.

Take at least 60 seconds. Give it a minute and then plug it in again

Unplug your TV and locate the power button on the Westinghouse television. For 30 seconds, hold the power button. Remember to use your remote control!

This will allow the TV to soft reset and turn off any remaining power.

Once the 60-second limit has passed, plug the TV into the power outlet. This should turn the TV back on.

About 80% of cases should be fixed by this method. It can be difficult to fix the remaining 20%.

Get batteries from Westinghouse remote

If your TV is still not working, remove the remote batteries.

Disconnect both batteries from the remote.

Remove the batteries and hold the power button for 30 second. This should take 30 seconds.

After the 30 seconds are up, you can plug in the batteries and turn on the TV again.

You might want to make sure you have enough batteries.

Factory reset will fix the problem permanently if you’ve tried all of the steps above to resolve your Westinghouse TV power problems.

Factory Reset Westinghouse TV

To temporarily power the TV, unplug or remove the remote batteries. Next, click on the Home button.

Next, navigate to Settings > System > Advanced Setting > Factory Reset > Factory Reset Everything. This will display the initial setup screen on your TV.

This will bring your Westinghouse TV back to its original state.

Factory Reset Westinghouse TV with remote

If you don’t own a remote, you can factory reset your Westinghouse television.

Button on the side of the TV

To turn off your TV, locate the reset button on the back of the device. On some models, this is on the right or left.

To write “, use a ballpoint pen. After holding the reset button for 10-15 seconds, you can press the rest key to stop.

USB keyboard

If your TV is difficult to find or in a difficult place, there are other options.

Plugin a USB keyboard first to the back of your Westinghouse TV.

Your TV can be reset and navigated using the keyboard.

Smartphone app

If you have a Westinghouse Roku TV, you can also download the Roku App to your smartphone.

After connecting your TV to the app, your smart smartphone can be used as a remote control.

Universal Remote

An old universal remote can be used to program the Westinghouse code.

Now you should have solved all power issues. You can still try the other steps I have provided before giving up.

The power cord to Westinghouse TV

Unplug your power cable from the back to resolve the power problem.

Plug it back in after 60 seconds of being unplugged.

Check that the connection is secure when you plug it into your TV.

After you have plugged the power cord in, turn on the TV by pressing and holding the power button.

We are excited to see your TV return to life.

Select the right input source

Incorrect input sources can cause your Westinghouse TV not to work.

Check that your HDMI port number is correct regardless of whether you’re using a streaming device or a cable box.

There are two ways to choose the right input source.

Method 1: Enabling input sources remotely

  1. Turn on your TV
  2. Use your remote control to push the Source button
  3. Select the input mode that you prefer

Method 2: Change input source without remote control

  1. Turn on your TV
  2. You can find the MENU button on the side or bottom of your TV.
  3. Navigate to the source option by pressing the volume button.
  4. Select the input source that you want by pressing the menu button

Select the input source that you like on certain TVs.

Locate a new power outlet

It is possible, although it seems unlikely. If this is still not working, you can try plugging your Westinghouse TV into another outlet in your home.

Sometimes outlets could have a short circuit or a blown fuse. It is unclear what might be causing it.

Another small appliance could be purchased and plugged into the same outlet as your TV.

A device that turns on means an outlet is working.

Although it is unlikely that this is the cause, it is an important step in troubleshooting and should be done quickly to eliminate the suspect.

Backlight broken

It’s possible that the backlight on your Westinghouse TV has stopped working after all of the attempts.

First, turn on your TV. Then use a flashlight to check if it’s there.

Flash the light and you can see the screen.

A faint image appears on the backlight of your TV.

Motherboard was fried

Your motherboard may have been damaged during a storm. Take off the back paneling of your Westinghouse TV to check.

Once you’ve done that, you’ll see multiple boards. On the left is the motherboard, while on the right is the power supply.

To make sure that your problem is not with your powerboard, plug in your TV to the wall and turn it on. Then disconnect the cable from the power board side connecting to the motherboard.

A dead TV means that the power board or motherboard is not working correctly.

It is easy to replace a motherboard. You should always verify the number on your board.

If you’re not confident fixing your TV yourself, you can hire a repairman

Westinghouse offers support

Contact the Westinghouse support if your Westinghouse TV doesn’t turn on.

The Hotline for support is 1 (866 482 7873 ).

Conclusion

Westinghouse TVs are finicky when it comes to power. Here are some solutions to a Westinghouse TV refusing to turn on.

  • You must wait for 60 seconds before unplugging the TV from its wall.
  • Remove the batteries and keep the power button down for at least 30 seconds
  • Whether you are using a remote or not, reset your TV to factory settings
  • Replace the power cord in the back of your TV
  • Make sure your TV is connected with the correct input source
  • It might be worth plugging your TV into a different power outlet
  • Send your TV to get a replacement backlight
  • Send your TV to get a replacement motherboard

The following solutions might work if none of these work. You will need to verify your warranty.

Let us know if this helped you fix your Westinghouse TV. Let us know if it did.

- Advertisement -spot_img

More articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisement -spot_img

Recent Posts