8 Ways to Fix the “No Internet Secured” Error on Windows 10

Windows 10 wireless networking issues are generally easy to fix. You may occasionally get a popup saying ” There is no Internet, secured”.

This error means that your wireless connection is not working properly. This error is frustrating, but relatively easy to correct. Let’s discuss eight solutions to fix “No Internet security” Windows 10 error.

What Does “No Internet Secured” Mean?

You might have noticed the error message in Windows 10’s System Tray. Or as a message. But what does “No Internet Secured”actually mean?

Windows 10 will display an unusually vague message. This error usually indicates that your internet service is down. However, this error may also appear if there is an active connection.

Confused? This is not surprising. This seems to be intentional. It is irrelevant whether your computer has an internet connection if it does not have one.

It is possible to see it on any Windows 10 device, but it’s more prevalent with Microsoft Surface tablets. It could happen regardless of whether your computer relies upon the same network card driver or driver. There are other factors that can lead to the “No Internet Secured” error.

Fixing the “No Internet Security” Error

There are many solutions for this ambiguous error. These are dependent on your computer setup, network adaptor and other factors. You may not be able to use all the fixes. We have listed them according to their likelihood. You can just go through the tips one by one.

This list will give an idea of what you need to do in order to fix the “No Internet security” error.

1. You can disable your VPN
2. Refresh Windows 10 IP configuration
3. Reset Winsock
4. Check the connection properties of your PC
5. Disable IPv6
6. Register a New DNS Service
7. Update the driver for your network device
8. Run the Network Troubleshooter for Windows 10

Before you attempt fixing the error, be sure to take the time necessary to thoroughly read each step.

1. Remove Your VPN

What if you connect to Wi-Fi and get a surprise error message that says “No Internet, secure”?

Don’t worry. If you’re using VPN clients, this issue can be caused by their built-in security measures. It can be the kill switch, which is used to disconnect you from internet access if the VPN server fails.

Disable your VPN by using the disconnect function. Or, you can simply exit the VPN completely. You can then reconnect to the Internet and attempt to access a website with regular updates, or a news source.

If everything works fine, then it was the VPN server that caused the problem. Make sure to update your VPN client. After that, connect to another VPN server. If everything works as it should, you’ve corrected the problem.

2. Refresh Windows 10 IP Configuration

Do you experience the “No Internet secured” message even though you’re not using VPN? There are some commands that will help you fix this error.

Right-click . Then, select Windows PowerShell. These commands are in the order shown:

3. Reset Winsock

Another command line solution to the error “No Internet, secured” is to reset Winsock.

Although the name of Winsock sounds like a local airfield, it’s actually the Windows Sockets API. This is a specification to allow your PC to communicate with network service, specifically TCP/IP.

This command will reset Winsock

Give it a while; if the network fails to automatically reconnect, make sure you wait.

4. Check Your PC’s Connection Properties

Still no joy? You should now check the network adapter in your PC.

1. By clicking the WiFi icon in the system tray, open the Settings screen Network and Internet Settings.
2. Click Switch adaptor options. Confirm that the following have been verified:

• Microsoft Networks Client
• Microsoft Networks File and Printer Sharing
• Internet Protocol Version 4 (TCP/IPv4)
• Internet Protocol Version 6 (TCP/IPv6)
• Discovery Responder in Link-layer Topology

To confirm, click OK If Windows has made any modifications, you will need to restart Windows.

5. Disable IPv6

IPv6, a networking protocol, replaces IPv4. It is designed to be used to replace IPv4 when the former runs out of IP address. However, IPv6 can be run on almost any hardware.

Repeat the steps above to disable IPv6. To confirm your selection, uncheck Internet Protocol Ver 6. (TCP/IPv6). Start Windows 10 when prompted.

6. Register a new DNS Server

The Domain Name System works just like an internet phonebook. It is automated and covers the entire earth. For example, DNS converts www.makeuseof.com to an IP address. It takes you to your requested website.

Sometimes, your system’s default DNS configuration can cause problems. It’s possible that your default DNS configuration is what is causing the “No Internet Secured” error. However, this fix is well worth the effort.

You can open the settings screen by clicking on the Wi-Fi connection icon from the system tray. Network & Internet Setting .

1. Click Switch adaptor options here, then right-click on the connection to be changed and click Property.
2. Select Internet Protocol Version 4 (TCP/IPv4) > Properties.
3. You can check by using the following DNS servers and input
4. DNS Server Preference:9.9.9.9
5. Alternative DNS Service:1.1.1.1
6. Enter OK

7. You should update the driver of your network device

It is worth updating the device driver that controls your network card because there is a possibility of it being defective.

1. Right-click Begin. Select Device Management.
2. Expand Internet Adapters. After selecting your network device, right-click on it and select the update driver.

Wait while your device driver is updated. Next, restart Windows. Windows 10 will connect to your network as normal after successful updates.

8. Run the network checker

You can also try this:

Windows 10 offers many troubleshooting and software tools that help you identify errors and then make or suggest repairs.

To launch Network Troubleshooter (HT0_ Windows key + ), then Settings, then Network, & internet > Network troubleshooter.