S controller? This is a common problem for many Xbox owners. Although wireless controllers today are easier than wired ones, they have their own problems.
This troubleshooting guide will show you how to fix an Xbox One controller that won’t turn on, connect, or sync properly. You’ll soon be back playing. These tips are primarily for the Xbox One, but most of them also work on the Xbox Series X or Series S because the controllers are almost identical.
1. How to Fix a Disconnected Xbox Controller
There are a few things you can do if your Xbox One controller won’t connect to your console.
Are you using eight controllers that are already connected to your console’s controller port? Although you probably don’t use these many controllers, eight is the maximum number that an Xbox One can support. After that, there is no way to connect more controllers.
To disconnect one or more controllers, hold the Xbox button on the controller. Next, connect the controller again.
Remember that you can only pair one controller with an Xbox system at a given time. You will need to pair your controller again with the Xbox of a friend if you take your controller to his house. This applies to your Xbox controller. Then, connect it to a PC.
2. Xbox One controllers that keep disconnecting
Imagine if your Xbox controller keeps disconnecting from the computer? This can be a huge problem and it can ruin your gaming session.
S to disconnect if not used for 15 minutes. While this won’t happen while playing games, it can occur if your Xbox One is used primarily as a media center.
Every so often, you’ll have to move the stick or press a button. You’ll need to move a stick or press a button every now and again.
If your Xbox controller is having trouble disconnecting, it may be happening more often than 15 minutes. You can try these troubleshooting steps if that is the case.
When you experience this problem, it is important to make sure your batteries are fully charged. To return to the Home menu, tap the Xbox button. Next, look for the battery icon at the top right. You should charge or replace the batteries if they are low.
Interference can also cause frequent disconnects. According to Xbox Support, the wireless range of the Xbox One controller is approximately 19-28 feet. If your controller isn’t connecting, you can move closer to it.
Also, remove any obstructions between your controller and console-like metal shelving or laptops. To improve the connection, move your Xbox from an entertainment center to another location.
3. If Your Xbox One Controller Is Blinking
If your controller’s Xbox button blinks or flashes when you press it, this is usually a sign that the controller is not paired with a console. This can occur when the controller is paired to another system, as mentioned previously. It can also happen due to other glitches.
A USB cable can be used to pair your controller if it doesn’t connect using the buttons. Plug the cable into your console’s USB port. Next, hold the Xbox key on your controller for several seconds.
If that fails to resolve the problem, restart your console. To fully turn it off, hold down the Xbox button (which acts as the power button) for 10 seconds. To turn it on, press the button again. You should be able to pair the console and controller after a power cycle.
Your controller might be experiencing blinking or turning off randomly after you do this. You can try a different controller to see if it works. Or, you could test the controller on a friend’s Xbox.
If the controller is not connecting, contact Xbox Support. To turn the controller off, you can hold down the Xbox button for several seconds. If the flashing light keeps on flashing, this can save battery life.
4. Your Xbox One controller won’t turn on
Don’t panic if your Xbox controller doesn’t turn on. Another common problem with similar solutions is the Xbox controller not turning on.
If your Xbox One controller isn’t turning on, check that the batteries aren’t low. The controller will not turn on if the batteries are low. Take off the back cover and replace the two AA batteries. Then, try again.
To get rechargeable batteries, you can also buy the Xbox Rechargeable Battery Kit. S controllers use. To charge your Xbox One controller, connect a micro USB cable instead.
This is a great way to change the batteries if your Xbox controller doesn’t turn on.
- For 10 seconds, turn off your Xbox One completely by pressing and holding down the power button at the front.
- For a few moments, unplug the power cable from your console and let it sit for a while.
- To connect your controller to it, use a USB cable that you are familiar with (if not, try other USB cables).
- Turn on your Xbox by pressing the power button. You should not press any buttons on the controller until your Xbox boots up.
- To test if your controller is working, press the Xbox button at this point.
General Xbox One Controller Connection Tips
We have already covered the specific problems with Xbox controllers. If your Xbox controller still doesn’t work after going through these steps, there are other solutions.
Firmware Update for Xbox Controller
The firmware on your Xbox One controller is updated periodically. Although it doesn’t receive these updates very often, outdated or corrupted firmware can cause disconnections.
To update your controller if it is functional, tap the Xbox button while the system is turned on. To access accessories, go to Profile & system > Settings > Devices & connections.
To check for updates, select your controller and then click the three dots button.
Take out Connected Xbox Accessories
Sometimes, Xbox One accessories attached to the console or controller can cause connection problems.
Try disconnecting any external hard drive, keyboard or other peripheral that is connected to your Xbox and reconnecting it. If you have a Stereo Headset Adapter, disconnect it and then try to reconnect your controller.
You should use a high-quality USB cable to sync your Xbox controller. You may have problems with low-quality cables or broken cables.
Connect another controller to your Xbox
You can try different devices, just like most troubleshooting. Connect a different controller that you are familiar with to your Xbox system. Also, make sure that the batteries are fully charged.
If the controller works well, the problem is with the original controller. If both controllers have issues, the problem is likely with your console. In this instance, you may need to contact Xbox Support.
Reboot your Xbox One
It was mentioned above but it is worth repeating: if you are having trouble with your controller, make sure that it is restarted. The default setting is to simply tap the power button at the front of your system. This will put it in sleep mode. Make sure you hold the power button for at least 10 seconds to complete a shutdown.
You can also choose Full shutdown if you have a functioning controller. Sometimes, a quick reboot can be all that is needed to fix an Xbox One controller.
Use a USB cable to connect permanently
To prevent any future problems, you can use the USB cable to fix your Xbox controller connection issues. A long cable like the 15-foot MATEIN micro USB cable is available so that you are not far from your system.
Although it’s not ideal, this is better than spending money on a new controller.
What if your Xbox One controller is still not working?
You can also visit the Xbox device support webpage if nothing else works. Register your Microsoft account and sign in to your console. Then, follow the steps to replace your controller. If Microsoft refuses to replace your controller, you will need to search for a deal on a replacement.
These tips should have solved your Xbox One controller problems. These tips will help you get back into the game, regardless of whether your controller isn’t connecting, flashing constantly, or not turning on.
We hope that you enjoy the products we recommend and discuss. MUO has sponsored and affiliate partnerships. This means that we get a portion of the revenue from your purchases. This doesn’t impact the price of your purchase and allows us to make the best product recommendations.
