8.3 C

Samsung Smart TV HDMI-ARC Not Working (6 Fixes)

Popular Posts

Your Samsung Smart TV’s HDMI ARC port allows you to connect to an external sound system to enjoy high-quality audio from your favorite movies, shows, and sporting events.

If your Samsung Smart TV HDMI ARC Not Working is not working, then you will have to listen to the audio from the TV’s speakers. This is a problem because most people watch TV in their living rooms or other large spaces, so this can result in poor audio quality. There are a few things that you can do to fix your Samsung Smart TV HDMI ARC Not Working.

What is HDMI ARC?

HDMI ARC stands for HDMI (High Definition Multimedia Interface) Audio Return Channel. This allows you to stream TV audio from your A/V receiver and speakers instead of the built-in speakers. You can use the following steps to repair an older TV that doesn’t have HDMI ARC or if it isn’t working correctly.

How to fix Samsung Smart TV HDMI-ARC not working

You may have noticed that your HDMI ARC port stopped working after the latest software update, or that it never worked at all. You may be wondering what to do about your smart TV.

This guide will help you troubleshoot and repair Samsung Smart TV HDMIARC ports. You can then enjoy seamless streaming again.

Make sure your Samsung Smart TV HDMIARC does not work if you are using the HDMI port marked with an ARC label. Make sure you are using HDMI 1.4 or higher cables. If these checks are all done, unplug any external devices connected to your TV. Make sure the cable is correctly connected. Check that the cable is not damaged. Enable AnyNet Plus (HDMI–CEC) feature.

Samsung TV Red Light Blinking -(Fixed)

Below, I will go into detail about the solutions and what you should do to fix it. This page will save you time and provide basic troubleshooting information for each issue. Keep reading!

  1. Make sure you have the correct HDMI port

Samsung smart TVs don’t have all HDMI ports that are ARC-authorized. This means that you won’t get ARC features if the port doesn’t support them.

Attach your audio receiver or speaker to the HDMI port. This port is only for HDMI-enabled items. You can attach other HDMI-enabled gadgets to the other HDMI ports. Check the manual to see if your TV supports ARC.

  1. Sound-Bar: Enable HDMI ARC

HDMI ARC may not be enabled on your receiver or soundbar so you won’t hear any audio from the TV. To use this feature, enable it first on your soundbar or receiver, then on your Samsung Smart TV. For more information on how to enable it, consult the manual of your soundbar receiver.

These steps will enable you to activate ARC on a Samsung Smart TV:

  • Open Settings.
  • Go to Sound > Sound Output/Speaker Setup/Speaker List/Speaker Setting/Anynet+ (HDMI–CEC).
  • Finally, turn on your receiver or select it.
  • Check that the soundbar works properly after you have turned on your ARC.
  1. Make sure to use the correct cables

Only the most recent HDMI cables can support ARC or eARC. Samsung recommends that users use HDMI 1.4 and higher cable standards.

Only these HDMI cables support ARC and its functionality. If you have an older HDMI cable, it may not work correctly. The Zeskit Maya HDMI 2.0 cable can be used. This cable supports eARC and can be future-proofed for 8K footage.

After connecting the right connections, verify that ARC is functioning properly. If it is not working, move on to the next step.

  1. Reboot the TV

Sometimes minor problems, such as sound problems, can be solved by restarting or rebooting your TV. Restart your TV to see if the problem has been solved. These steps will help you restart your Samsung TV.

  • Turn off your TV.
  • Unplug your TV from the wall.
  • After waiting at least 20-30 seconds, plug the TV back into your computer.
  • Now, turn on your TV.
  • We hope that your problem will be solved.
  1. Verify that there is no loose connection

An unconnected connection could cause your Samsung TV HDMIARC to not sound. Check that the HDMI ARC cable at the back of the TV is connected properly. To restore sound, unplug the cable and tighten it.

  1. Factory reset your TV

You might also try factory reset if none of these methods work. These steps will help you factory reset your Samsung TV.

  • Navigate to Settings, then General.
  • Navigate to Reset.
  • Enter your PIN code. (Default is 0000).
  • Choose reset.
  • Accept the warning to begin the reset.

Your TV will now be restarted and the reset process will complete. After the reset is complete, connect the TV to your Wi Fi, receiver, soundbar, or soundbar to verify that HDMI ARC works properly.

What can you do if there is no work?

If none of these troubleshooting steps are successful, please contact Samsung.

They will attempt to resolve the problem by phone. To resolve the problem, you can also hire a technician.

Contact the manufacturer if you suspect that HDMI ARC is not working on your receiver or soundbar.

Samsung TV HDMI ARC Port Not Working

If your Samsung TV’s HDMI ARC port isn’t working, you can replace the cable to check if it is the cable. If that doesn’t solve the problem, unplug your TV for three minutes and then turn it on again.

Samsung TV HDMI ARC Stopped Working

Make sure that the HDMI ARC has not become unresponsive on your Samsung TV. To ensure that the function is not lost, make sure you replace the wire with a new one.

Last words about this Article

Based on my research, I did my best to help you solve your Samsung Smart TV HDMI ARC not Working problem. Let us know what you think in the comments box. Keep smiling and be well. We’ll see you next time.

- Advertisement -spot_img

More articles


Please enter your comment!
Please enter your name here

- Advertisement -spot_img

Recent Posts