7.2 C

How can you fix the “Stuck in Automatic Repair” loop in Windows 10

Popular Posts

Windows 10 provides troubleshooting tools that will help you fix any issues that might prevent your computer from starting properly.

What do you do if the tool gives you an error? This is a list to help you fix your computer if it gets stuck in an auto-repair loop.

What is an Automatic Repair Loop?

Windows 10 does not restart properly, leading to an error known as the “automatic repair loop”. Windows 10 launches an auto-repair tool and attempts to fix its system.

Many things can cause Windows 10’s auto repair loop. These files can be difficult to find. Windows 10 won’t be able to repair or boot itself if they aren’t there.

This error is most commonly caused by missing drivers. If drivers aren’t properly installed, new peripherals could also cause an error.



Malware infections, faulty parts and corrupted registry can also be a possible cause.

1. Use the Fixboot and Chkdsk commands

There are tools that will help you if you can’t find the problem. This scan will be performed by the Check Disk utility and any errors that are found will be repaired.

Windows won’t start, but you can force Windows to launch a Command Prompt screen using the Advanced options screen.


How to do it:

  1. To start your computer, press the F8 key. A spinning icon and Windows logo will appear before you press the F8 key.
  2. These are Select an option screen, select Troubleshoot > Advanced Option > Command Prompt.
  3. . To confirm, hit the Enter key. Enter :
    chkdsk c: /r
  4. This is what you should be doing if you’re interested. chkdsk If the command fails, you can use the Fixboot command. The Command Prompt window will open. Type the following command. To confirm, hit the “Enter” key. Enter :
    Fixboot C:
  5. Close the Command Prompt window once you’re done. Next, restart the computer.

2. Perform a system scan in Safe Mode

Windows will replace any corrupted images that have been damaged using the system repair tools by replacing them with the local image.

This tool can only be used if Safe Mode is disabled.

  1. Start your computer again as before. Hit the key to open Windows Boot Troubleshooting Menu.
  2. Select > Advanced Reparations Options > Troubleshooting>> Advanced Options> Startup Settings> Restart
  3. You will now see a list with restart options. Select Enable Safe Mode With Networking and then select F5 with your keyboard.
  4. After Windows has started in Safe Mode, click on the Start Menu and choose Windows PowerShell.
  5. In the PowerShell window, enter the following command. To confirm, hit the Enter key. Enter :
    DISM/Online/Cleanup Image/RestoreHealth
  6. This could take some time. After the DISM tool has finished, restart your computer. Follow these steps to activate PowerShell Safe Mode.
  7. Enter the command by pressing the Enter key. Enter :
  8. We will verify that Windows is fully restored by checking the integrity of Windows’ system files.

3. Restore Windows Registry

Registry file corruptions may sometimes be caused either by malware infections or disk issues.

These steps are used to fix registry issues:

  1. Go to the Windows Boot Troubleshooting Menu.
  2. To view advanced repair options, select Troubleshoot Advanced Options Command Prompt.
  3. Enter the next command by pressing the Enter key Enter :
    C:\Windows\System32\config\\rregback* C:\Windows\System32\config\
  4. When asked to overwrite files, type All. Next, press.
  5. After you’re done, restart your computer.

4. Deactivate the Automatic Repair Tool

You can disable the auto-startup repair system if you are satisfied that Windows is working properly. This will allow you to see if Windows is actually at fault.

This will enable Windows 10 to disable the automatic repair tool.

  1. Go to the Windows Boot Troubleshooting Menu.
  2. To view advanced repair options, select Troubleshoot Advanced Options Command Prompt.
  3. Enter the following command.
  4. Verify recoveryenabled, the identifier, and the value.
  5. Type the following command and hit the “Enter” button. Enter :
    bcdedit/set default Recoveryenabled no
  6. This will disable auto-boot repairs If this command fails, you can try the following command:
    Set current Recoveryenabled no
  7. After you’re done, restart your computer.

5. Reset Your Windows 10 Device

For computers that are stuck in an auto-repair loop, a reset Windows 10 is an option. You have two options: Keep your files, or delete them all.

Open Windows boot troubleshooting. Select Troubleshoot > Create this PC.

The Automatic Repair Loop

Frustration can result from using a tool to solve your problem. These solutions can get your computer on the right track.

- Advertisement -spot_img

More articles


Please enter your comment!
Please enter your name here

- Advertisement -spot_img

Recent Posts