You are likely to have experienced some issues with your iPhone. One of these annoying problems is the Apple logo on your iPhone. Any further actions on the iPhone are impossible if you can’t see past the glowing Apple logo.
How do you handle the iPhone sticking to the Apple logo?
These simple, proven solutions to the iPhone Apple logo loop problem will make your life easier. Follow the article to learn the different solutions for this particular issue with your iPhone.
This resource will keep you informed about the latest solutions to the iPhone’s frozen logo. You can also view the video.
Method 1: Reboot your iPhone hard to fix the Apple logo that is frozen.
Force restarting or hard rebooting your iPhone is the first step to resolving the problem. It usually works in most cases. This is true only if there are no other unknown problems with your iPhone. Let’s now see how it all works.
How to hard reboot iOS devices to fix the Apple logo loop.
For iPhone 8 and above, as well as iPads without the Home button:
- Press and hold the Volume Up and Volume Down buttons.
- For approximately ten seconds, keep pressing the Power (side-) button. Release it when the Apple logo appears on the screen.
- These three actions can be performed immediately one after the other.
iPhone 7, 7 Plus, and other 7th-generation iOS devices: Tap on the Volume button and Power buttons simultaneously until the screen turns off. Press down on the Power button until you see the Apple logo on your iPhone’s screen. This will force restart and hard reboot your iPhone.
iPhone 6s/6s Plus, older iPad models (with the Home button), Press and hold the Home button while simultaneously pressing the Side (or Top), buttons. When you see the Apple logo appear on your iPhone’s screen, release them.
Method 2 Use Tenorshare to fix your iPhone stuck to the Apple logo.
There are many third-party apps that can help you fix your iPhone problems. The Tenorshare is a recommended application for fixing your iPhone’s stuck logo. This application has been praised by many users as the best solution to the problem. You won’t even lose your data when you use this app to restart your iPhone.
Here’s how to use Tenorshare Reiboot for your iPhone as an issue fixer.
- First, download the Tenorshare Reiboot and install it on your Mac or Windows PC. Click on the link above to get the download link. It is very easy to install the application.
- Next, connect your Mac or Windows PC to your iPhone. Next, put your iPhone into recovery mode.
- Run Tenorshare Reiboot now on your device. You will find the instructions manual that you need to follow in order to put your iPhone into recovery mode.
- Two options will be displayed on the screen in the next step. Choose the one that will allow you to resolve this issue without losing any data.
- This will prompt you for the latest firmware package. The latest firmware will fix any iPhone problems. The Tenorshare Reiboot App allows you to easily download the firmware.
- Your iPhone is now successfully fixed after the firmware has been downloaded and installed.
Follow the normal setup process to restart your iPhone.
Method 3 DFU Recovery mode to fix an iPhone stuck at the Apple logo
The third option is the DFU (Device Firmware Upgrade) Restore method, which is the final way to fix the iPhone’s boot loop. This should only be used as a last resort as it could cause data loss to your iPhone. Let’s now get to the point.
iPhone 7 or higher, and later:
- Connect your iPhone 8 and 12 to your Mac, or Windows PC.
- Next, open iTunes on your connected device.
- Hold the Volume (Up), and then release it in a split second. The Volume (Down), button can be used in the same way.
- Next, press the Power button again and wait for your phone’s screen turn black.
- Hold down the Volume (Down), while simultaneously pressing the Side button. Continue doing this until you get a prompt message saying “iTunes detected an iPhone in Recovery Mode”.
- After you have put your iPhone in DFU, click on the OK button to open the next iTunes popup window.
- Click on the Restore button again to restore your iPhone to DFU Restore.
You should be aware that if you use the DFU mode for fixing your iPhone’s stuck Apple logo, you are responsible for any data loss.
I hope you find this guide helpful and that it helps with your iPhone problems. Imagine that your iPhone freezes with the Apple logo. These three steps will help you troubleshoot any issues.
The iPhone Apple logo loop is usually caused by a bug in an iOS device. Most cases can be solved by updating to the most recent firmware package. If the problem is caused by hardware problems, you should contact Apple Support. Get help from Apple Store and Apple device experts if this is the case.
